Your location: Dogs > Dog House Heaters

Hound Heater Classic Dog House Heater

The newly designed Hound Heater 2 is back. The Classic Hound Heater now features a four sided ventilation system that will effectively heat up to 16 cubic feet using a 90 watt heating element.

The Classic Hound Heater will stay at a constant 130 degrees when the outside temperature is below freezing, keeping your pet warm and comfortable.

The Hound Heater II will heat an average size dog house (typically 48"L x 24"T x 24"W -- approx. 16 cubic feet) with a 50,000 hour, 90 watt, wire resistance element. At 0 ° F outside, the house will stay around 40 ° F. If you need to warm a larger area, multiple heaters may be installed. (We recommend that a Thermo Cube be used to help regulate the temperature and save energy.)

Hound Heater II Dog House Heater Features at a Glance

  • Made from durable, 16 gauge powder coated steel
  • 5-1/2" by 5½" by 5½".
  • Easy to install in square dog houses
  • Wall Mount Only! No Floor or Ceiling
  • Uses 50,000 hour, 90 watt, wire resistance element
  • 8 foot, 3- prong, grounded cord
  • Cord strain relief to eliminate cord tension problems
  • 1 year manufacturer's warranty.

Mounting Instructions

  • Measure down the wall 7" and over 7" from a top corner of the dog house.
  • Drill a ⅞" to 1" dia. hole at the previous located mark.
  • Run Hound Heater cord through your hole.
  • Mount 4 screws in the base of the Hound Heater.
$59.95 ea
Classic Hound Heater 2 Dog House Heater
Thermometers Allow You to Check Temperatures Periodically
$11.99 ea
Indoor / Outdoor Thermometer with 12' Wired Probe